Jerzees 993MR NuBlend Full-Zip Hoodie: Complete Style Guide

The Jerzees 993MR NuBlend Full-Zip Hoodie completes the Jerzees fleece trifecta alongside the 996MR pullover hoodie and 562MR crewneck. With the same 8 oz NuBlend pill-resistant fleece and the added convenience of a full-length aluminum zipper, the 993MR is the go-to choice for DTF printers creating custom zip-up merchandise, corporate outerwear, and layering pieces.

For the full Jerzees catalog, see our Jerzees Shirt Size Chart Complete Guide. For hoodie comparisons, see our Blank Hoodies and Specialty Apparel Guide.

---

Jerzees 993MR Specifications

---

Complete Jerzees 993MR Size Chart

Note: The 993MR tops out at 3XL (vs 5XL for the 996MR pullover). If you need extended sizes in a zip-up hoodie, you may need to look at Gildan or other brands.

---

DTF Printing Guide for Zip-Up Hoodies

Zip-up hoodies present unique challenges for DTF printing that pullover hoodies and crewnecks do not have. The center zipper divides the front panel, and the zipper hardware creates uneven pressure zones during pressing.

Recommended Press Settings

### Best Print Locations for Zip-Up Hoodies Avoid: Full-front prints that cross the zipper line. The zipper hardware will prevent even pressure and cause adhesion failures along the center seam.

Zip-Up Pressing Tips

Use a pressing pillow — Insert a heat-resistant pressing pillow inside the hoodie before pressing. This serves two purposes: (1) it prevents the zipper and back fabric from interfering with the front press, and (2) it pushes the print surface upward into the heat platen for even contact. Tape the zipper — Use heat-resistant tape to cover the zipper pull and top stop when pressing chest prints near the zipper. This prevents the metal hardware from scratching the transfer or heat platen. Back prints are easiest — The upper back of a zip-up hoodie is the largest uninterrupted print area and has no hardware interference. Back prints are the easiest and most reliable placement on zip-ups.

For detailed placement measurements, see our Shirt Placement Guide.

---

Jerzees 993MR Color Options

The 993MR is available in 13+ colors:

Black, White, Navy, True Red, Royal, Forest Green, Charcoal Grey, Oxford, Ash, Burnt Orange, Maroon, True Blue, and Athletic Heather.

The color selection is smaller than the pullover 996MR (46+) because zip-up hoodies are a lower-volume category. Core neutral and team colors are well-represented.

---

Where to Buy the Jerzees 993MR Wholesale

SanMar — Jerzees 993MR — Full color range, bulk pricing, same-day shipping. S&S Activewear — Jerzees 993MR — Competitive per-unit pricing. JiffyShirts — Jerzees 993MR — No minimums. Great for testing colors and small custom orders.

Typical Wholesale Pricing

• Single unit: ~$13–16 per hoodie
• Dozen lots: ~$10–13 per hoodie
• Case lots (36+): ~$9–11 per hoodie

Full-zip hoodies cost $2–3 more per unit than comparable pullover hoodies due to the zipper hardware and construction.

---

993MR vs 996MR: Pullover vs Full-Zip

Choose the 993MR when: Your design works best on left/right chest or back placements, or your customers prefer the zip-up style for layering. Choose the 996MR when: You want the widest color selection, extended sizes, full-front print capability, and the most affordable per-unit cost. See our 996MR Style Guide.

---

Frequently Asked Questions

Can you DTF print across the zipper on a zip-up hoodie?

No. The zipper hardware prevents even pressure distribution, which will cause adhesion failures and an uneven print. Always place designs on one side of the zipper (left chest, right chest) or on the back panel.

Why does the 993MR only go up to 3XL?

Zip-up hoodies are a lower-volume category than pullover hoodies, and Jerzees has not extended the 993MR size range beyond 3XL. If you need 4XL–5XL in a zip-up, look at the Gildan 18600 or alternative brands.

Is the 993MR NuBlend pill-resistant?

Yes. The 993MR uses the same NuBlend pill-resistant fleece as the 996MR pullover and 562MR crewneck. The pill resistance is a fabric feature that does not diminish with washing.

Can I put a DTF transfer on the hood?

Technically yes, but it is not recommended. Hoods have compound curves and seams that make even pressing very difficult. The 1-ply hood on the 993MR is thinner than the 2-ply on the 996MR, which makes hood pressing even more unreliable.